Connect with us


Top 3 Safety Hazards You Need To Avoid While Installing Solar Panels In Jacksonville:

Installing solar panels in Jacksonville

People may think radiation from the sun magically transforms into electricity. In that case, technicians do some additional work to make a working condition of the devices. Hazards are common it may occur in any working industries to avoid those hazards, working professionals should take measures to avoid those hazards. In solar panel photovoltaic cell collect energy from the sun and convert it to current. That can be used to power homes or business. Jacksonville is a city in Florida. Jacksonville solar panels are made up of silicon, phosphorus, and Boron. It was non-reflective glasses the glass protects the solar cells from damage.

Shock or electrocution from energized conductors:

The photovoltaic system presents the risk of shock and electrocution. The human body has a resistance of about 600 ohms and a resistance of 75 milliamperes. According to ohms law v=IR voltage, current, resistance. Considering 75 ma is the Lethal limit. When a human body is exposed to 120 volts and calculate with Ohm’s law formula I=V/R. it’s more than 2.5 times the Lethal limit.

Precaution to avoid such hazards:

So, protecting from the shock the workers should wear Gloves. Hazards happen when corroded cables, connections loose wiring, and improper may lead to a short circuit. So, the grounding conductor bonds all metallic components together, and eventually to ground the grounding electrode conductor. Grounding electrode are to be checked whether it is grounded properly. Make some conditions that Modules be at least 3 feet away from the edge of the roof.

Arc fault that sparks fires:

Fire is always a potential hazard. Electrical arc faults discharge high power between two or more conductors. Arc fault produces heat in the wire it makes a spark in the wire, then the insulation wire gets deteriorated.

Control measures for Arc fault:

Control measures for Arc fault are circuit interrupters. Arc fault may lead to a short circuit being so strong enough to trigger a circuit breaker or circuit interrupter. To protect against sparks, you must install Arc fault circuit interrupter outlet or AFCI circuit breaker. AFCI detects low-level hazards.

Arc Flash leading to the explosion:

Larger scale photovoltaic are medium and high-level voltage, this voltage is susceptible to Arc flash. Those Arc flash Releases Radiant energy up to four times the temperature of the Sun surface. Arc fault in both DC and AC conductors occurs when a large amount of energy is available in arc fault, it releases some hot gases.

Control measures AC and DC side mitigation:

The combiner box with multiple strings is combined in parallel to increase the current. Control measures on Direct current include reducing the potential of arc flash. Alternate current measures mitigation includes arc resistance switchgear, which redirected arc flash memory, through the top of the enclosure away from personnel and equipment. Direct current is without inverter and alternate current is with an inverter. In direct current uses multiple string inverters that can connect the system in parallel. Combiner boxes are used instead of using two or more large central inverters.

Equipments used

Use the multimeter to check the AC voltage and DC voltage. You can check the current also by using a multimeter. Consider whether the panels are at a high altitude. High altitude is the reason because of lesser insulation and less density. Probe and probe accessories to have short tips and tip covers, retractable probe to avoid touch metal. Look for the Solar panels Jacksonville that have high-quality test leads. They have high-energy fuse replacements. These fuses are lifesavers so do not use cheaper fuses.

The Bottom line:

Solar panel installation requires a high level of experience and the experts in PV installation should be used for installation for big industries. They should use proper personal protective equipment, arc-rated clothing, gloves, goggles, and safety glasses. The footwear should be on leather shoes. Safer maintaining of PV system should follow the instruction given above. Follow the company safety procedure when testing or servicing the equipment.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.