Connect with us

Home Improvement

6 Essential Components Of A Residential Air Conditioning System

Residential Air Conditioning System

Air conditioning units are critical equipment in every central home in California. The Residential Heating and Air Conditioning Santa Rosa have the same values as the home appliance. The air conditioner sucks the heat out of the indoor air and activates the heat stored outside your house. Both the many parts and systems have to work together seamlessly to reach optimum efficiency.

We’re going to break down the 6 key components of the air conditioning system, explain what they’re doing, and demonstrate how critical they are.

1. Thermostat

Thermostats are temperature-sensitive instruments that indicate the start and end of the air conditioning system. New programmable and intelligent thermostats deliver innovative features that help you conserve energy dollars with programmed temperature adjustments. If you are already using a mercury-based or electric thermostat, try switching to a more efficient one.

Although seven-day programmable thermostats are good, the benefits of having a flexible thermostat greatly outweigh any initial phase costs.

2. Fans

There are two ventilators in the air conditioning system that draws ventilation over the exhaust system and the cooling coil. The fans are in the exterior machine, helping to draw in and eject the dirt. If you have a typical cube-style AC unit, you can see fans when you observe at the end. This only spins while the machine is working and constantly slowing off.

3. Compressor

Many households with a central air conditioning system have a separate air conditioning unit. The compressor is mounted in these units in the exterior unit. Usually, this is the noisiest part. It is the compressor’s duty to receive the coolant from the evaporator and arrange the coolant to heat the condensing unit.

There’s an engine that drives the compressor with a turbine and a cylinder. The compressor pumps a gaseous refrigerant and increases the coolant’s temperature so that it transitions to high-pressure air.

4. Filters

The air filter’s primary function is to shield the elements of the HVAC from the buildup of soil and debris. It also preserves your unit from absurdly high energy bills. A dirty evaporator coil lacks cooling ability and can freeze. Filters help keep the fan engine clean and avoid early loss. There are several common types of HVAC air filters.

Also, Check – Sovereign Air Conditioning

5. Evaporator Coil

The evaporator coil is situated at the end of the air managing equipment or, in some situations, as in a traditional electrically heated air handler, is an integral part of the air handling system. Air flows across the coil’s face through the air handler to cool the air and regulate the humidity. The coil should be visually examined if the access point is given to see the soil, garbage, and degradation.

Usually, thermal gradients at the outlet and inlet of the coil are advised. Several inspection contractors are carried out to provide insight into how the coil is working and whether further analysis of the unstable coil face is required.

Condensate water is created as part of the ventilation process. The condensate collecting systems can be used to assess the construction’s efficiency and ensure that the condensate systems are sufficiently sealed and drained to or beyond the sanitary sewer.

Where the capture pan systems are visible, signs of leakage in the case of a coil that could suggest a malfunction of the evaporator coil’s drains or a need for basic upkeep should be considered.

6. Condensing Unit

Usually, the condensing machine is located outside. The condensing device shall be observed from the outside to ensure that the coils are clean and appropriate. The fan can operate smoothly and without unnecessary buzzing, vibration, or rattling. The circuitry to the condensing machine should be in a duct and a decent repair condition.

Control cables, which are low power, should be wired to the refrigerant lines to avoid injury. The refrigerant pipe to the device should be in good repair with intact insulation and working as expected on the coolant return line. The fluid line must be visibly in good shape.

If there are fluid sight glasses in the piping system, there should be no bubbles while the device is in operation. If the device has capillary tubing, there is little need for a viewing glass, and one will be of little to no value. The access panel for the condensing unit can be removed so that the electronic equipment can be displayed and the transistors and relays can be inspected. 

If the transistors are leaking, they must be reported as needing maintenance. If the main contractor is burnt, ringing loudly, or has any signs of degradation, it should be recorded as being in need of repair. In general, the wiring in the condensing device’s electric cabin should be in strong athletic repair with no compromised or burnt areas, which could lead to failure at any time.


To learn more about your air conditioner units and their components, or to arrange a heating and cooling call, please contact Residential Heating and Air Conditioning experts in Santa Rosa. Our mission is to help our customers learn about energy and home comfort problems.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Recent Comments

Recent Posts